SURFSIDE MARINA

Sea Bright, NJ

home | history | services | directions | contact | dock layout
river map and area charts | local forcast | tide reports | fishing reports | local links
Surfside Marina Services
Surfside Marina standard labor rate is $90.00 per hour. Additional charges for shop supplies, environmental fees and taxes may apply. All prices are quoted per unit/engine, additional parts or materials are not included in these quotes.

For more information or a specific quote contact us via phone 732.842.0844 or email info@surfsidemarina.net.

Would you like to be placed on our winter or summer waiting list? Send an email to waitinglist@surfsidemarina.net.

Summer Services
ServiceDetailsPrice
Summer Slip Rates or Rack StorageSummer slip storage at Surfside Marina includes: Summer slip or rack rental from April 15th to October 15th. Rental includes water, electric, bathroom facilities and other amenities such as BBQ pit and picnic area.$105.00/ft
Paint BottomPaint bottom of boat.$8.00/ft. (paint and materials not included)
Paint OutdivePaint outdrive.$150.00
Commission Inboard/Outdrive EngineCommission of inboard or outdrive engine(s).$25.00
Commission Outboard EngineCommission of outboard engine(s).$20.00
Commission Air ConditionerCommission of air conditioner system.$10.00
Commission Water SystemsCommission of salt or fresh water system.$15.00
Commission Water Systems with Hot Water TankCommission of hot water system.$20.00
Detail Boat (rub rail down)Wax hull of boat from rub rail down.$10.00/ft.
Detail Boat (rub rail up)Wax hull of boat from rub rail up.$10.00/ft.
HaulBoat haul out and re-launch.$7.00/ft.
PowerwashPowerwash boat.$6.00/ft.
* Slip reservation letters will be mailed out in December. Summer slip payments are due in full by May 1st to hold your summer slip reservation.
Space
Winter Services
ServiceDetailsPrice
Winter StorageStorage at Surfside Marina includes: haul out of water, power wash bottom, drive(s), block and launch in Spring. (October 15th to April 15th)$45.00/ft.
Winter StorageLand storage only at Surfside Marina for season. (Land Only No Haul)$40.00/ft.
Haul/LaunchHaul out of water, block and re-launch.$7.00/ft.
Power WashPower wash bottom, drives and chemical clean water line.$7.00/ft.
Winterize Outboard EnginesWinterize outboard engine(s).$200.00 each
Winterize EFI Outboard EnginesWinterize EFI outboard engine(s).$200.00 each
Winterize Inboard/Outboard EnginesWinterize inboard engine(s).$200.00 each
Outdrive StorageOutdrive removal and storage.$200.00 each
Fresh Water SystemsWinterize fresh water system.$50.00
Fresh Water SystemsWinterize fresh water system with hot water.$75.00
Fresh Water SystemsWinterize air conditioner.$50.00
Salt Water SystemsWinterize baitwell and wash down pump.$50.00
Salt Water SystemsWinterization of holding tanks or porta-pottie systems.$50.00
Pump out Head SystemSurcharge for holding tanks or porta-pottie pump out.$200.00
Shrink WrapAll sizes.$15.00/ft.
Shrink WrapInstallation of access door.$50.00 each
CanvasRemoval, storage and reinstallation of canvas.$100.00 each
BatteriesBattery removal, storage, charge and reinstallation.$50.00 each
Other services available upon request.
* Please have all heads pumped dry prior to haul. We do not have the equipment to preform this service.
** Payment is due in full prior to work begins.
Space
Specials and Other Services
ServiceDetailsPrice
Early ReservationDiscount for early reservation of summer slip. (Must be paid in full by April 1st)$5 off per foot
Off Season SlipsAll boats must be out of the water by November 1st or make arrangements with office. Off season slips are available for $100 per week. 
Space
Winterization Procedures


Inboard
1. Run engine, check for proper operating conditions and flush cooling system
2. Run the engine sufficiently to bring up to normal operating temperature and all the portable gas tank filled with a mixture to circulate through the fuel system
3. Coat internal combustion chambers and values w/fogging oil
4. Spray lubricant on all external engine parts to prevent corrosion
5. If the engine is MPI change the fuel filter

Outboard
1. Run engine, check for proper operating conditions and flush cooling system
2. Run the engine sufficiently to bring up to normal operating temperature and all the portable gas tank filled with a mixture to circulate through the fuel system
3. Coat internal combustion chambers and values w/fogging oil
4. Drain block of water and then fill internal water passage w/anti-freeze, which contains a rust inhibitor
5. Spray lubricant on all external engine parts to prevent corrosion
6. If the engine is closed cool water system check the anti-freeze
7. If the engine is MPI change the fuel filter

Outdrive
1. Remove unit
2. Inspect universal bearing, universal joints, bellows, shift shaft bushing, etc
3. Drain gear lube and refill, reinstall drain screws and replace gaskets
4. Grease shaft and all zerk fittings
5. Reinstall unit

Outboard
1. Run engine, check for proper operating conditions and flush cooling system
2. Run the engine sufficiently to bring up to normal operating temperature and allow the portable gas tank filled with a storage mixture to circulate through the fuel system
3. Coat internal combustion chambers and values w/fogging oil
4. Grease all zerk fittings
5. Drain gear lube and refill, reinstall drain screws and replace gaskets
6. Spray lubricant on all necessary external engine parts to prevent corrosion

Water Systems
1. Drain the water out of the system
2. Run anti-freeze through the system
3. Check for obvious leaks

Space
Space
Copyright 2006 SurfSide Marine Corporation